How to access Draytek routers

Disclaimer: While this guide provides general steps, the exact interface and options might vary slightly depending on your router's firmware version.

Step One: 

We need to navigate to the router login page by going to https://*LAN Gateway address*

Once there, you should see: 

Please log in with your credentials. If unsure, please contact our Helpdesk if it's an Exa provided Draytek. 

Step 2: 

Before we start configuring the rule, we need to see if an External IP has been configured for use. This is done under WAN IP Alias, and this allows you to assign multiple public IP addresses to a single WAN interface. This can be done by navigating to the WAN section on the left-hand side menu and selecting Internet Access as highlighted below: 

Once selected, you should see all WAN interfaces: 

Select the relevant WAN interface by clicking on the Details Page option; in this case, we'll use WAN1. You will see: 

On this page, there will be an option called ‘WAN IP Alias’, select that 

In the next usable one, configure the external IP you will use.